User Account 1 1
Cart 0 € 0,00

UC series – compact stand-alone I/O modules with USB, Ethernet, CAN, and CANopen

The DEDITEC UC series comprises compact stand-alone I/O modules for measurement, control, and automation tasks. Depending on the version, USB, Ethernet, CAN, or CANopen is available for communication. For signal acquisition and output, the series offers various digital and analog I/O versions as well as modules for temperature measurement.

The UC series is particularly suitable for small to medium-sized applications where a compact, ready-to-use stand-alone I/O module is required and no extensively expandable modular system architecture is needed. The modules are generally operated as stand-alone units. Versions with a USB interface and UC-CANopen modules can also be connected to one another via an optional In-Rail connector. UC versions with an Ethernet interface do not support In-Rail connection.

The UC series at a glance

Feature Benefit
Compact stand-alone I/O modules For small to medium-sized measurement, control, and automation tasks without an extensive modular system architecture.
USB, Ethernet, CAN, or CANopen The appropriate communication interface can be selected depending on the application.
Digital and analog I/Os Different input and output signals can be acquired or output according to the requirements of the respective application.
Temperature measurement Variants for temperature measurement with thermocouples extend the range of applications.
DIN rail mounting Compact integration into control cabinets and technical installations.
Optional In-Rail connection For UC modules with a USB interface and for UC-CANopen, the CAN bus and power supply can be passed between multiple modules via the In-Rail connector. Versions with an Ethernet interface do not support In-Rail connection.
DELIB/API and ICT-Tool Integration into your own software as well as configuration, functional testing, and diagnostics.
Various I/O versions Selection based on channel count, signal type, resolution, and electrical requirements.

Which applications is the UC series suitable for?

The UC series is particularly suitable for compact measurement, control, and automation tasks where a stand-alone I/O module is to be connected directly to a control PC, network, or CAN system. With different variants for digital, analog, and temperature-related signals, the appropriate module can be selected according to the requirements of the respective application.

PC-based measurement and control systems

Depending on the version, UC modules can communicate with a control PC via USB, Ethernet, or CAN. The digital or analog signals are processed by the respective customer application. The DELIB API, among other options, is available for software integration.

Small-scale automation projects

For manageable automation tasks, a single UC module can provide the required inputs or outputs without the need to build an extensive modular I/O system. Depending on the application, digital inputs, relay or MOSFET outputs, as well as analog inputs and outputs, are available.

Acquire and output analog signals

The UC series offers different variants for analog voltage and current signals. These can be used to acquire measured values or output analog setpoint and control signals. Depending on the module, different channel counts, measurement ranges, and resolutions are available.

Digital control and switching tasks

For digital I/O applications, UC variants with optocoupler-isolated inputs and relay or MOSFET outputs are available. This allows digital signal states to be acquired and corresponding switching and control functions to be implemented.

Temperature measurement

For temperature measurement applications, UC variants with four thermocouple inputs for Type K sensors are available. This allows the UC series to be used for compact temperature acquisition and monitoring tasks.

CAN- and CANopen-based automation tasks

For CAN-based applications, UC-CAN variants are available. Supported communication modes include RAW CAN, SAE J1939, and the DEDITEC DELIB command mode. A separate UC-CANopen product family is available for standardized CANopen systems.

Other typical application areas for the UC series include test benches and test systems, laboratory and R&D applications, machine and plant control, measurement data acquisition, process monitoring and quality assurance, as well as PC-, CAN-, or CANopen-based automation systems.

When is the UC series the right choice?

The UC series is particularly suitable when a compact stand-alone I/O module is required for a small to medium-sized measurement, control, or automation task. Instead of implementing a larger modular I/O system, a suitable UC variant can be selected directly with the required inputs and outputs as well as the appropriate communication interface for the application.

The UC series is particularly suitable when:

  • a compact stand-alone I/O module for DIN rail mounting is required,
  • only a manageable number of defined inputs and outputs is needed,
  • USB, Ethernet, CAN, or CANopen is required as the communication interface,
  • digital or analog signals need to be acquired or output,
  • temperature measurement is part of the application,
  • the module is to be integrated directly into a custom PC or software application,
  • no extensively expandable modular I/O architecture, such as the NET series, is required.

UC series or NET series?

The UC series is particularly suitable for compact stand-alone applications with a largely predefined I/O task. In contrast, the NET series is designed for modularly expandable systems where different I/O types, higher channel counts, or future expansion are key requirements.

The I/O configuration is predefined by the respective module variant and cannot subsequently be expanded by adding further I/O modules. The UC series is therefore particularly suited to applications where the required I/O configuration is already largely defined.

If You Need … More Suitable
Compact stand-alone I/O module UC series
Small to medium-sized measurement or control task UC series
Predefined I/O configuration UC series
Modularly expandable I/O system NET series
Multiple different I/O types within one system NET series
Higher channel counts or future expansion NET series

Stand-alone – but expandable when required

In the UC series, stand-alone does not mean that only a single module can be used. UC modules with a USB interface as well as UC-CANopen modules can be connected to one another via an optional In-Rail connector. The CAN bus and power supply are then passed between the modules through the connector.
UC variants with an Ethernet interface, however, do not support In-Rail connection. This applies both to UC-ETH modules and to UC-CAN variants with an additional Ethernet interface.
UC variant In-Rail connection
UC-USB Yes
UC-ETH No
UC-CAN with USB interface Yes
UC-CAN with Ethernet interface No
UC-CANopen Yes

When is the UC series less suitable?

The UC series is generally not the first choice when:

  • a large number of different I/O types need to be combined within a single modular system,
  • an extensive I/O architecture with future modular expansion is planned from the outset,
  • higher channel counts are required within a centrally structured I/O architecture.

In these cases, it should be evaluated whether the modular NET series is better suited to the application.

USB, Ethernet, CAN, or CANopen – which UC interface is right?

The UC series is available with different communication interfaces. Which variant is suitable depends primarily on how the I/O module is to be integrated into the application: locally and directly connected to a PC, via a network, within a CAN system, or as a CANopen device.
CAN and CANopen should not be treated as equivalent. The standard UC-CAN modules support communication modes including RAW CAN and SAE J1939.
The UC-CANopen series is a separate product family designed specifically for CANopen-based systems.
Variant Communication Particularly suitable when …
UC-USB USB the I/O module is to be connected locally and directly to a PC.
UC-ETH Ethernet / WiFi / TCP/IP the module needs to be accessible via a network or Modbus TCP is to be used.
UC-CAN CAN the module is to be integrated into an existing CAN application or RAW CAN or SAE J1939 communication is required.
UC-CANopen CANopen standardized CANopen integration based on CiA profiles is required.

UC-USB – direct connection to the control PC

UC-USB is particularly suitable for local PC-based measurement and control applications where the I/O module is to be connected directly to the control PC.

UC-ETH – I/O via Ethernet, WiFi, and Modbus TCP

UC-ETH is suitable when the I/O module needs to be accessible via an Ethernet or WiFi network. UC-ETH and UC-CAN-E modules can be integrated into local corporate networks or other IP-based networks via LAN and/or WiFi. In addition to control via DELIB or the open DEDITEC protocol, the Ethernet variants also support Modbus TCP.
Some variants in the series additionally feature a WPS button for convenient WiFi setup. Alternatively, the WiFi configuration can be performed using the ICT-Tool.

UC-CAN – RAW CAN, SAE J1939, and automatic TX/RX functions

UC-CAN is suitable for applications where input and output signals need to be integrated into an existing CAN system. Supported communication modes include RAW CAN and SAE J1939. Automatic transmit and receive messages can be configured using the ICT-Tool.
Depending on the variant, UC-CAN modules are additionally equipped with USB or Ethernet as a configuration interface. With UC-CAN, CAN remains the primary functional interface, while the additional interface is used for configuration. The additional interface also determines whether an In-Rail connection is supported: UC-CAN variants with a USB interface support the In-Rail connector, whereas variants with an Ethernet interface do not.

UC-CANopen – for standardized CANopen systems

UC-CANopen is designed for applications in which I/O functions are to be integrated into an existing automation system via CANopen. The modules support CANopen profiles according to CiA 301, CiA 305, and CiA 401 and can be operated either as stand-alone devices or as part of a network consisting of multiple UC-CANopen modules.

Which interface should I choose?

  • Choose USB if the module is to be operated locally and connected directly to a PC.
  • Choose Ethernet/WiFi if the module needs to be accessible via a LAN or WiFi network or if Modbus TCP is required.
  • Choose CAN if RAW CAN, SAE J1939, or project-specific CAN communication is required.
  • Choose CANopen if the module is to be integrated as a CANopen I/O device into an existing CANopen network.

Digital, analog, and temperature I/Os of the UC series

The UC series offers different I/O variants for digital, analog, and temperature-related measurement and control tasks. Depending on the application, a module can be selected based on the required signal type, channel count, resolution, and electrical requirements.

Category Typical UC variants Application
Analog inputs AD2-16/18 ISO, AD16-16/18 Acquisition of voltage and current signals
Analog outputs DA2-16 ISO, DA4-16, DA8-16 Output of analog setpoint and control signals
Digital inputs OPTOIN / O16 Acquisition of digital signal states
Relay outputs R16_3A, O8-R8_3A Potential-free relay-based switching tasks
MOSFET outputs M16, O8-M8 Electronic switching tasks
Temperature THERMO4_K Temperature measurement using Type K thermocouples
Combined digital I/Os O8-R8 / O8-M8 Digital inputs and outputs within a single module

Analog inputs for voltage and current signals

For the acquisition of analog signals, UC modules with different channel counts and resolutions are available. Depending on the variant, voltage or current signals can be processed. Versions with galvanically isolated inputs are also available.

Analog outputs for setpoint and control signals

For the output of analog signals, UC modules with 2, 4, or 8 output channels are available. Depending on the module, the variants can be used for voltage signals and, where supported, also for current signals.

Digital inputs with optocouplers

For the acquisition of digital signal states, UC variants with optocoupler-isolated inputs are available. These are suitable for reliably detecting binary input signals and forwarding them to the higher-level control or software application.

Relay and MOSFET outputs

For switching applications, UC variants with relay or MOSFET outputs are available. The relay variants of the UC Series feature potential-free relay outputs. Depending on the application, this allows a choice between relay-based and electronic output stages.

Temperature measurement with thermocouples

For temperature measurement applications, the UC series offers variants with four inputs for Type K thermocouples. This makes the UC series suitable for compact temperature acquisition tasks.

Combined digital inputs and outputs

For applications that require both the acquisition of digital signal states and the switching of outputs, combined UC variants are available, for example with eight digital inputs and eight relay or MOSFET outputs.

Which I/O type is right?

  • Choose analog inputs when voltage, current, or sensor signals need to be measured.
  • Choose analog outputs when setpoints or analog control signals need to be generated.
  • Choose digital inputs when switching states or binary signals need to be acquired.
  • Choose relay outputs when electrical loads need to be switched using conventional relay contacts.
  • Choose MOSFET outputs when electronic switching functions are required.
  • Choose temperature modules when thermocouple signals need to be acquired directly.
  • Choose combined I/O modules when digital inputs and outputs are required within a compact stand-alone module.

How to select the right UC module

Which UC module is suitable for an application primarily depends on five factors: communication interface, required I/O type, channel count, electrical signal type, and the desired software or protocol integration.

UC-CANOPEN-DIO view
UC-DA4_8 view
NET-CPU-BASE view
UC-DIO view
UC-CANOPEN-REL4_UM view
R

1. Define the communication interface

USB is suitable for a direct local connection to a PC. Ethernet enables integration via a network and, for the corresponding variants, also supports Modbus TCP. CAN is intended for applications using RAW CAN, SAE J1939, or the DEDITEC communication mode. CANopen is the appropriate variant for integration into CANopen-based systems.

R

2. Determine the required I/O type

Next, determine whether digital inputs, relay or MOSFET outputs, analog inputs or outputs, temperature inputs, or combined digital I/Os are required.

R

3. Select the channel count and resolution

Depending on the variant, analog input modules are available with, for example, 2 or 16 channels. Analog output variants are available with 2, 4, or 8 channels. For analog inputs, the required resolution must also be taken into account.

R

4. Check voltage, current, and switching requirements

For analog modules, the required voltage or current ranges must be determined. For digital outputs, the output technology and electrical load capacity must be suitable for the application.

R

5. Consider Software and Protocol Integration

For standard UC variants, DELIB, open DEDITEC protocols, and the ICT-Tool are available, among other options. Ethernet variants additionally support Modbus TCP; UC-CAN supports communication modes including RAW CAN and SAE J1939, while UC-CANopen provides standardized CANopen communication.

Question Selection criterion
How should the module communicate? USB, Ethernet, CAN, or CANopen
Which signal types are required? Digital, analog, or temperature
How many channels are required? e.g. 2, 4, 8, or 16 channels
Which electrical signal type is used? Voltage, current, relay, MOSFET
Which software/protocol interface is required? DELIB, Modbus TCP, RAW CAN, J1939, or CANopen

How is the right UC module selected?

The appropriate UC module is selected first based on the communication interface, followed by the I/O type, channel count, resolution, and electrical signal type. USB is suitable for local PC applications, Ethernet for network-based applications, UC-CAN for CAN-based systems, and UC-CANopen for standardized CANopen environments.

Select UC modules by function

Select the appropriate UC module based on the required I/O function and communication interface. The products are grouped by analog inputs, analog outputs, digital I/Os, relay, MOSFET, and temperature functions, as well as UC-CANopen.

Analog inputs

Analog outputs

Control the UC series and integrate it into your own software

The UC series can be integrated into custom measurement, control, and automation applications in different ways. For standard UC variants, the DEDITEC DELIB driver library, open communication protocols, and various software tools are available. Ethernet variants additionally support Modbus TCP. The ICT-Tool can be used for configuration, functional testing, diagnostics, and firmware updates.
Control method / tool Suitable for Practical benefit
DELIB driver library / API Custom PC and software applications Consistent integration of UC hardware into custom applications
Open DEDITEC protocol Custom or low-level hardware integration Direct communication without DELIB via open protocols
Modbus TCP Ethernet-based control and automation systems Standardized access to I/O data via registers and bits
DELIB CLI Scripts, testing, and automated processes Command-line control
ICT-Tool Commissioning, configuration, and diagnostics Configure, test, diagnose, and update module firmware
RAW CAN / J1939 CAN-based applications Integration into corresponding CAN communication architectures
CANopen CANopen-based systems Standardized integration of UC-CANopen modules

Custom applications with DELIB and API

For integration into custom applications, DELIB supports various programming languages and development environments, including C/C++, C#, Delphi, Visual Basic, Java, LabVIEW, and Python. For Python, DEDITEC provides the files delib.py and delib.dll, which can be integrated into the respective customer project. This makes the DELIB commands available in Python as well. For standard UC variants, the API provides access to the required I/O and communication functions.

Command-line control with DELIB CLI

With the DELIB CLI, UC-USB and UC-Ethernet modules can also be accessed via the command line. This is suitable, for example, for scripts, testing, and automated processes under Windows and Linux.

How can the UC Series be integrated into custom software?

Standard UC variants can be integrated into custom applications using the DEDITEC DELIB or, where supported by the respective interface, accessed directly via the open DEDITEC communication protocols. Ethernet variants additionally support Modbus TCP. The ICT-Tool is available for testing, configuration, and diagnostics. UC-CANopen is integrated separately into existing systems via CANopen.

Open DEDITEC protocol

For custom integrations, UC modules with the corresponding interfaces can also be accessed directly via the open DEDITEC communication protocols. This allows the hardware to be integrated into custom systems and applications independently of DELIB.

Commissioning and diagnostics with the ICT-Tool

With the ICT-Tool, UC modules can be configured, tested, and diagnosed without first having to develop a custom application. Firmware updates can also be transferred directly to the modules.

Modbus TCP for Ethernet variants

UC-Ethernet modules can also be accessed via Modbus TCP. This allows the I/Os to be integrated into suitably equipped control and automation systems using a standardized TCP/IP-based protocol.

Consider UC-CANopen separately

UC-CANopen is not controlled via DELIB but uses standardized CANopen communication. For this reason, UC-CANopen is treated separately from standard UC-CAN modules with regard to software and protocol integration.

More than simple I/O – additional functions of the UC series

In addition to acquiring and outputting digital and analog signals, the UC Series provides additional functions for monitoring, local responses, CAN communication, as well as commissioning and diagnostics. The functions available depend in part on the configuration of the respective module.
Function Benefit
Event Control Automatic actions based on defined input states or measured values
Timeout / watchdog function For UC modules with digital or analog outputs: automatically switch off outputs if communication is interrupted
Digital input filters Suppress short interference pulses
State change detection Detect changes at digital inputs between two polling cycles
Input counters Count events at digital inputs
CAN Auto TX/RX Automatically transmit and receive CAN messages
M2M communication Direct data exchange between compatible modules
Testing and diagnostics Verify I/Os, communication, and access times

Event Control for Local Responses

Event Control allows a UC module to respond automatically to defined events. Depending on the module configuration, digital outputs can be switched, analog values can be output, or CAN messages can be transmitted as soon as a predefined condition is met.
Example: If an analog input exceeds a defined threshold, the UC module can automatically switch an output, depending on its configuration, without requiring the response to be triggered continuously by the PC application.

Timeout / watchdog function for output modules

The timeout function (watchdog function) is supported by UC modules with digital or analog outputs. If communication with the module is interrupted for a defined period of time, the outputs can be switched off automatically. Pure digital or analog input variants do not support this function.

Digital input filters and state change detection

Programmable input filters help suppress short interference pulses at digital inputs. State changes at digital inputs can be detected and stored internally, allowing signal transitions that occur between two regular polling cycles to be evaluated.

Digital input counters

Counter functions are available for the corresponding digital inputs. This allows events or state changes to be counted and evaluated by the software.

Automatic transmission and reception of CAN messages

Using CAN Auto TX/RX, UC-CAN modules can automatically transmit, receive, and process CAN messages according to predefined settings. This eliminates the need for every individual CAN message to be triggered directly by the higher-level PC application.

M2M – direct communication between modules

Depending on the interface and module configuration, DEDITEC modules can also communicate directly with one another. M2M can be used, for example, to automatically transfer measured values or states between compatible modules. For Ethernet, the transmit function depends on the configuration of the respective module.

Testing and diagnostic options

For commissioning and troubleshooting, the ICT-Tool provides various testing and diagnostic functions. Digital and analog I/Os can be tested, signal paths can be verified using loopback tests, and access times can be measured. Additional graphical diagnostic functions are available for analog inputs.

Diagnostic function Benefit
Digital cable loopback test Check wiring and digital signal paths
Analog cable loopback test Check analog signal paths
Modbus I/O test Test Modbus TCP communication and I/Os
Access time test Determine minimum, maximum, and average access times
Input counters Count events at digital inputs
A/D noise visualization Graphically evaluate the behavior of an analog input signal

Which additional functions does the UC Series offer?

In addition to digital, analog, and temperature-related I/O functions, the UC Series offers features such as Event Control, timeout functions, digital input filters, state change detection, and input counters, depending on the module configuration. UC-CAN variants also support automatic CAN TX/RX functions. For commissioning and troubleshooting, the ICT-Tool provides a comprehensive range of testing and diagnostic functions.

UC series in practice

The UC series is particularly suitable for compact measurement, control, and automation tasks with clearly defined I/O requirements. Thanks to the different interface and I/O variants, the stand-alone module can be selected to match the specific application and integrated into custom PC, network, CAN, or CANopen systems.
DDT-Icon_Prüfstands-und-Testsysteme

PC-based measurement systems

Analog or digital measurement values can be acquired using a UC module and transferred to a PC application. Depending on the variant, communication takes place via USB, Ethernet, or CAN. For custom applications, the I/O functions can be integrated using the corresponding software and communication interfaces.

DDT-Icon_Maschinen-und-Anlagenautomation

Compact automation and control tasks

For automation tasks that require only a defined number of inputs and outputs, a UC module can be used as a compact stand-alone solution. Digital inputs can acquire signal states, while relay, MOSFET, or analog outputs perform the corresponding control functions.
DDT-Icon_Gebaeude-und-Facility-Automation

Analog measurement and control tasks

For applications involving analog signals, UC variants with different input and output configurations are available. These can be used, for example, to acquire voltage or current values and to output analog setpoint and control signals.
DDT-Icon_Entwicklungspruefstaende-und-Sondermaschinen

Acquire digital states and switch outputs

For digital control tasks, input signals can be acquired via optocouplers, while outputs can be switched using relays or MOSFETs. Combined UC variants integrate digital inputs and outputs within a single compact module.
DDT-Icon_Forschung-und-Entwicklung

Temperature measurement in compact test setups

UC variants with temperature inputs enable direct acquisition of Type K thermocouples. This allows temperature values to be integrated into compact measurement and monitoring applications.
DDT-Icon_Praxisbeispiel-Steuergeraetepruefung

CAN-based measurement and control tasks

UC-CAN modules combine digital or analog I/O functions with CAN communication. In addition to RAW CAN, SAE J1939 is supported; automatic TX/RX functions also enable configured transmission and reception of CAN messages.
Support for SAE J1939 should not be understood as a specific automotive positioning. UC-CAN modules are primarily designed for industrial applications, for example in control cabinet and plant engineering.
DDT-Icon_Praxisbeispiel-Gepufferte-Analogausgabe-ueber-Ethernet

CANopen-based automation

For CANopen applications, the UC-CANopen Series is available. The modules can be operated as stand-alone devices or as part of a multi-module configuration and integrated into corresponding automation systems via CANopen.
DDT-Icon_Praxisbeispiel-Gepufferte-Analogausgabe-ueber-Ethernet

What is the UC series used for?

The UC series is used for compact measurement, control, and automation tasks. Typical applications include acquiring digital or analog signals, outputting switching and control signals, and measuring temperatures. Depending on the application, USB, Ethernet, CAN, or CANopen is available for communication.

UC, NET, RO, or BS – which DEDITEC I/O series is right?

The DEDITEC I/O series differ primarily in form factor, expandability, channel count, and system architecture. The UC series is designed particularly for compact stand-alone applications with clearly defined I/O requirements. For modularly expandable systems, especially compact form factors or high I/O channel counts, the NET, RO, and BS series provide additional options.
Requirement Suitable series
Compact stand-alone I/O module UC series
Small to medium-sized measurement and control task UC series
USB, Ethernet, CAN, or CANopen as a compact I/O solution UC series
Build a modular system and expand it later NET series
Combine many different I/O types within one system NET series
Higher channel counts and more complex I/O structures NET series
Very low installation depth RO series
Custom I/O configurations and special functions in a low-profile design RO series
High I/O channel counts in a compact aluminum enclosure RO series
No future modular expansion required UC, RO, or BS series – depending on I/O requirements and form factor

UC series – compact stand-alone I/O modules

Choose the UC series when a compact, ready-to-use stand-alone I/O module is required for a small to medium-sized measurement, control, or automation task.

NET series – modularly expandable I/O system

Choose the NET series when different I/O types need to be combined, higher channel counts are required, or future expansions need to be taken into account during system planning.

RO series – when low installation depth is critical

Choose the RO series when installation depth is particularly limited or when different I/O types and special functions need to be combined in a low-profile module design.

BS series – many I/Os in a compact enclosure

Choose the BS series when a high number of inputs or outputs is required in a compact aluminum enclosure and no modular expansion, as provided by the NET series, is planned.

UC or NET – the key difference

UC series NET series
Compact stand-alone module Modular I/O system
For defined I/O tasks For flexibly configurable I/O structures
Small to medium-sized applications Larger or more complex systems
Selection of a suitable module Combination of CPU and I/O modules
No modular expansion required Expandability is a core element of the system

What is the difference between the UC and NET series?

The UC series consists of compact stand-alone I/O modules for small to medium-sized measurement, control, and automation tasks. The NET series, by contrast, is designed as a modularly expandable I/O system and is particularly suitable when different I/O types, higher channel counts, or future expansions are required.

Which criteria are important when selecting the appropriate I/O series?

1. How many inputs and outputs are required?
2. Which signal types need to be processed?
3. Which communication interface is required?
4. Does the system need to support modular expansion at a later stage?
5. What are the requirements regarding form factor and installation space?

In simplified terms: Compact and stand-alone → UC | Modular and expandable → NET | Particularly low-profile → RO | Many I/Os in an aluminum enclosure → BS.

Development, long-term availability and technical support

For I/O modules, current technical specifications are not the only important factor. For long-term measurement, control and automation projects, availability, documentation, software integration and technical support are also important selection criteria.
Benefit Description
Made in Germany Development and manufacturing in Germany
10 years of long-term availability For long-term projects and future reordering
Technical support Support with selection, commissioning and integration
Software & documentation DELIB/API, sample code, ICT-Tool and open communication protocols
Slider-Logo_Made in Germany

Made in Germany

The UC series is developed and manufactured by DEDITEC in Germany. This keeps development, production and technical support closely integrated.

DDT Icons Downloads DRIVE Transparent 250606

Software, documentation and sample code

Software tools, API functions and sample programs are available for integrating the UC series. DELIB can be used to integrate standard UC variants into custom applications; the ICT-Tool and open communication protocols are also available for the corresponding interfaces.

DDT 20 002 USP Leiste Teil 04

What advantages does DEDITEC offer for long-term use of the UC series?

The UC series is developed and manufactured in Germany. DEDITEC offers 10 years of long-term availability for the series and provides support with selection, commissioning and software integration. DELIB/API, sample code, the ICT-Tool and open communication protocols are available for integration.

DDT 20 002 USP Leiste 10 Jahre Teil 02

10 years of long-term availability

DEDITEC offers 10 years of long-term availability for the UC series. This also supports long-term projects in which replacement modules or reordering may be required over an extended period.
The modular product development approach supports this long-term strategy, as individual assemblies can be adapted more selectively when component availability changes.

DDT 20 002 USP Leiste 10 Jahre Teil 02

Custom software and firmware adaptations

As with the other DEDITEC series, custom software and firmware adaptations can also be implemented for the UC series if the standard functions are not sufficient for a specific application.

Slider-Logo_DDT-Guetesiegel

Technical support with selection and integration

DEDITEC provides support in selecting the appropriate UC module as well as with questions relating to the interface, I/O variant, commissioning and software integration. For specific requirements, custom software and firmware adaptations are also available.

DDT 20 002 USP Leiste Teil 04

Open communication protocols

For UC products with the corresponding interfaces, DEDITEC provides open communication protocols. This allows the modules to be integrated directly into project-specific applications without using DELIB.

Frequently asked questions about the UC series

What is the DEDITEC UC series?

:
;
The UC series comprises compact stand-alone I/O modules for small to medium-sized measurement, control and automation tasks. Depending on the variant, USB, Ethernet, CAN or CANopen interfaces are available, along with different digital, analog and temperature-related I/O functions.

What does “stand-alone” mean for the UC series?

:
;
Stand-alone means that a UC module can generally be operated independently and does not necessarily require a separate CPU or additional I/O submodules. If required, multiple compatible UC modules can also be connected to one another via an optional In-Rail connector.

Which interfaces are available for the UC series?

:
;
Depending on the variant, USB, Ethernet or CAN are available as communication interfaces. Ethernet-capable UC variants can also be integrated into a network via WiFi. For CANopen-based applications, the separate UC-CANopen series is available.

What is the difference between the UC and NET series?

:
;
The UC series consists of compact stand-alone I/O modules for small to medium-sized measurement, control and automation tasks. The NET series, by contrast, is designed as a modularly expandable I/O system and is particularly suitable when different I/O types need to be combined, higher channel counts are required or future expansions are planned.

Which digital and analog I/Os are available for the UC series?

:
;
Depending on the module, available I/O functions include optocoupler-isolated inputs, relay and MOSFET outputs, analog inputs and outputs, combined digital I/Os, and temperature inputs. Analog variants additionally differ in channel count, resolution, and signal range.

Does the UC series support Modbus TCP?

:
;
Yes. The Ethernet variants can be accessed via Modbus TCP. This allows I/O data to be read and written via registers and bits and enables the modules to be integrated into suitably equipped control and automation applications.

Can the UC series be integrated into custom software?

:
;
Yes. For standard UC variants, the DEDITEC DELIB driver library with API is available. Supported programming languages and development environments include C, C++, C#, Delphi, Visual Basic, VB.NET, VBA, Java, LabVIEW, and Python. For Python, DEDITEC provides delib.py and delib.dll, allowing DELIB commands to be integrated into Python projects. For products with the corresponding interfaces, the open DEDITEC communication protocols can also be used directly.

Can a UC module be commissioned without custom programming?

:
;
Yes. Using the ICT-Tool, UC modules can be configured, tested, and diagnosed without first having to develop a custom software application.

What is the difference between UC-CAN and UC-CANopen?

:
;
UC-CAN supports RAW CAN, SAE J1939, and the DEDITEC DELIB command mode, among other communication modes. UC-CANopen, by contrast, is designed for standardized CANopen applications and supports CANopen profiles according to CiA 301, CiA 305, and CiA 401.

Can the UC series automatically respond to input signals?

:
;
Yes. The UC series supports Event Control. Depending on the module configuration, actions can be triggered automatically when defined conditions are met, for example when a specified analog value is reached or when a digital input signal is detected.

What happens if communication is interrupted?

:
;
The timeout/watchdog function is available for UC modules with digital or analog outputs. If the module is no longer accessed within the defined time period, the outputs can be switched off automatically. Input-only variants do not support this function.

Can multiple UC modules be connected together?

:
;
Yes, depending on the respective interface variant. UC-USB, UC-CAN variants with a USB interface, and UC-CANopen support the optional In-Rail connection. This allows the CAN bus and power supply to be passed between the modules. UC-ETH and UC-CAN variants with an Ethernet interface do not support the In-Rail connection.

How long are products in the UC series available?

:
;
DEDITEC offers 10 years of long-term availability for the UC series. This supports long-term projects as well as future replacement and reordering requirements.

Find the right UC module for your application

Select the appropriate UC module based on the interface, I/O type, channel count and electrical requirements. Depending on the application, variants with USB, Ethernet, CAN or CANopen as well as digital, analog and temperature-related I/Os are available.
If you need support in selecting the appropriate module or with software integration, DEDITEC can assist with the technical selection and integration.

Select UC products

Select the appropriate module directly by interface and I/O function.

Support with selection

Unsure about the interface, signal type, channel count or software integration?

Are you unsure which UC module is right?

Do you need support in selecting the interface, I/O type or electrical configuration? DEDITEC can help you select the appropriate UC module for your application and, if required, integrate it into your software or communication environment.

Helpful information for your inquiry:

  • preferred interface, e.g. USB, Ethernet, CAN or CANopen,
  • number and type of required I/Os,
  • voltage and/or current ranges,
  • loads to be switched,
  • software or programming language used,
  • required communication protocol or special functions such as Event Control or
    Modbus TCP.
My cart
Your cart is empty.

Looks like you haven't made a choice yet.