Software Description

• Control options via DELIB, protocol level, DELIB CLI, graphical applications
• DELIB driver library, DELIB sample sources, DELIB for Linux
• Web interface (only for Ethernet modules)
• DELIB API and its functions

ICT-Tool

• Add module to PC
• Configure module/interface (Ethernet, USB, CAN, Serial)
• Settings for M2M and Event Control (only for supported modules)
• Test and diagnose module
• Install firmware updates
• Save/load module configurations using a separate file

DELIB API Reference

• Directory structure of DELIB
• Management functions
• Error handling
• Manage digital inputs and outputs
• Manage analog inputs and outputs
• Manage software FIFO
• Manage output timeout
• Register read and write commands

Software package for the 64-bit version of the ICT-Tool and the DELIB driver library.

The following operating systems are compatible:
64-bit:

• Windows 10/11 x64
• Windows 8 x64
• Windows 7 x64
• Windows Server 2012 x64
• Windows Server 2008 x64
• Windows Vista x64
• Windows XP x64
• Windows Server 2003 x64
• Windows 2000 x64

Supplied software

ICT-Tool x64

• Updating the DEDITEC module-firmware
• Assigning module addresses
• Module-specific settings
• Configuration of CAN modules
• Test and diagnosis of module functions
• Configuration of the watchdog stick

Replaces the following software

• DT-Flasher x64
• DELIB Module Demo x64
• CAN Configuration Utility x64
• DELIB Module Config x64
• DELIB Configuration Utility x64
• Watchdog Configuration Utility x64

DELIB Command Line Interface x64

Enables the execution of DELIB commands in the command line.

Software package for the 32-bit version of the ICT-Tool and the DELIB driver library.

The following operating systems are compatible:
32-bit:

• • • Windows 10/11
    • Windows 8
    • Windows 7
    • Windows Server 2012
    • Windows Server 2008
    • Windows Vista
    • Windows XP
    • Windows Server 2003
    • Windows 2000

Supplied software

ICT-Tool x32

• • • Updating the DEDITEC module-firmware
    • Assigning module addresses
    • Module-specific settings
    • Configuration of CAN modules
    • Test and diagnosis of module functions
    • Configuration of the watchdog stick

Replaces the following software

• • • DT-Flasher
    • DELIB Module Demo
    • CAN Configuration Utility
    • DELIB Module Config
    • DELIB Configuration Utility
    • Watchdog Configuration Utility

Attention:

With this version of the driver library, only 32-bit applications can be created, which can then be executed on 32- and 64-bit systems.

DELIB driver library for Linux distributions (32/64-bit) from kernel 2.6.x

This driver package contains the following components

• DELIB USB driver
• DELIB Ethernet driver
• DELIB CLI

DELIB USB driver

Support for the following products:

• NET series (via USB interface)
• RO-USB series
• BS-USB series
• USB mini-sticks
• USB watchdog
• USB-OPTION-8 / USB-RELAY-8
• USB-TTL-32 / USB-TTL-64

Note:

With the standard version of the USB driver, several USB products with different module IDs (e.g. one RO-USB and one USB-OPTOIN-8) can be addressed. No further driver installation is required.

If several USB products with the same module ID (e.g. a USB-OPTOIN-8 and a USB-RELAIS-8) are to be addressed, the Linux FTDI driver must also be installed. You can find the FTDI driver at http://www.ftdichip.com.

DELIB Ethernet driver

Support for the following products:

• NET series (via Ethernet interface)
• RO-ETH series
• RO-ETH/LC series
• BS-ETH series
• ETH-OPTION-8 / ETH-RELAY-8
• ETH-TTL-64

DELIB CLI

With the DELIB CLI (Command Line Interface) for Linux, all commands for digital and analog I/Os can be set directly via the command line

Registerbelegung

• Register assignment
• Registers for digital inputs and outputs
• Registers for analog inputs and outputs
• Timeout register for digital and analog outputs

CAN protocol

• Speed and interface parameters
• Structure “Transmission package”
• Structure “Response package”
• Structure of the CAN packages TX/RX

Ethernet protocol (TCP)

• Explanation TCP protocol
• Structure “Transmitter string”
• Structure “Response string”

Serial protocol

• Speed and interface parameters
• Structure “Transmitter string”
• Structure “Response string”

Register allocation

• Register overview
• Status register
• Register for digital inputs and outputs
• Register for analog inputs and outputs
• Timeout registers for digital and analog outputs

• C (Microsoft Visual C++ 6.0, Borland C)
• C++ (Microsoft Visual C++ 6.0)
• C# (Microsoft Visual C# 2008 bis 2024)
• Delphi (Borland Delphi 7)
• VB (Microsoft Visual Basic 6.0)
• VB.NET (Microsoft Visual Basic 2008 bis 2015)
• Java (Java Native Interface)
• Java.dll (Ethernet-Protokoll für Ethernet-Produkte)

The driver is compatible with the following operating systems:

32-bit:

• Windows 11/10
• Windows 8
• Windows 7
• Windows Server 2008
• Windows Vista
• Windows XP
• Windows Server 2003
• Windows 2000

64 bit:

• Windows 11/10 x64
• Windows 8 x64
• Windows 7 x64
• Windows Server 2008 x64
• Windows Vista x64
• Windows XP x64
• Windows Server 2003 x64
• Windows 2000 x64

This package contains the latest firmware files for the following product series:

• STARTER series
• BS series
• RO series
• NET series
• UC series
• CAN-IO-Box
• Development accessories

The firmware flash file package can alternatively be downloaded via the ICT tool.

You can use these files to renew or update the firmware of your CANopen module.

The EDS files are used to control a CANopen module.