USB to RS-485 converter with galvanic isolation
€ 112,46 Incl. 19% VAT plus shipping
Our promise to you
With this handy USB stick, you can connect your PC or notebook to the world of RS-485 devices. The galvanic isolation provides electrical separation between the PC and the RS-485 interface. Disturbing surges on the RS-485 side that could damage such a converter are thus a thing of the past. Thanks to the galvanic isolation, even industrial systems operating at different electrical levels than the PC or notebook can be safely connected.
- USB to RS-485 converter
- Galvanic isolation
- 50 baud ..115200 baud (software configurable)
- Windows VCP (Virtual COM Port)
- Linux drivers included
USB interface with Plug & Play
Thanks to Plug & Play, our modules with USB interface are automatically recognized and are immediately ready for use without any configuration. Configuration is only required if several USB modules from the same product series are used on the same system.
LEDs
Each digital input and output has a separate LED that lights up when the signal status is active. The status of the operating voltage, communication with the interface, error events or the occurrence of a timeout can also be displayed.
General information
| Supply voltage | +5 V (via the USB port) |
|---|---|
| Interface | USB 2.0 / USB 1.1 |
| Galvanic isolation | up to 500 V AC |
| LEDs |
|
| Connection RS-485 side | 9pin. D-SUB plug |
| Connection cable | approx. 3 m |
| Operating temperature | +10 °C ... +50 °C |
| Enclosure dimensions | 84.5 mm x 21 mm x 12.5 mm (L x W x H) |
Manual
Manual USB-RS-485-Stick
Hardware and software description
Hardware description
- List of technical data
- Definition of the LEDs
- Pin assignment of the connectors
Software description
- Installing VCP drivers
Reviews