24V din rail relay

0 customer reviews

 23,21

Availability: In Stock SKU: ZBH-REL-PH_24V Category:

PLC interface for limiting continuous currents up to 10A, consisting of basic terminal with screw connection and pluggable miniature relay. Mountable on NS 35/7.5 DIN rail.

  • Nominal voltage: 24V AC/DC
  • Switching voltage: 250 V AC/DC
  • 1 changeover contact
  • Reverse polarity protection, freewheeling diode
  • LED for voltage indication
  • Phoenix Contact, 2967633, PLC-RSC- 24UC/21HC

General
Manufacturer Phoenix Contact: 2967633, PLC-RSC- 24UC/21HC
Supply voltage 24V AC/DC
Coil current 17,5mA
Maximum switching voltage 250V AC/DC
Note: For voltages above 250 V (L1, L2, L3) between the same terminals of adjacent modules, a special isolating plate is required. For further information please refer to the data sheet.
Minimum switching voltage 12V AC/DC
Maximum inrush current 30A (300 ms)
Minimum switching current 100mA
Limit continuous current 10A,
6A (Value applies to pins 12. If pins 12 are bridged, the normal value applies)
Maximum breaking capacity (resistive load) 240W (at 24V DC),
58W (at 48V DC),
48W (at 60V DC),
50W (at 110V DC),
80W (at 220V DC),
2500VA (at 250V AC)
Maximum bridged breaking capacity (resistive load) 144W (at 24V DC value applies to the connections 12. If the connections 12 are bridged, the normal value applies),
1500VA (at 250V AC value applies to terminals 12; if terminals 12 are bridged, the normal value applies)
Activity LED Operating voltage display
Operating temperature -40°C … 60°C
Dimensions in mm 80mm x 14mm x 94mm (HxWxD)

Additional information

Weight 0,066 kg

Reviews

There are no reviews yet.

Be the first to review “24V din rail relay”

Your email address will not be published. Required fields are marked *

Use our advantages

DEDITEC Logo

Lifetime
updates

Free soft- & hardware(firmware)-updates.
Enjoy our lifetime update service.

DEDITEC Logo

5 years
Delivery availability

We offer at least 5 years delivery availability for our products.
Our experience shows that it is even about 10 years.

DEDITEC Logo

Questions about the product? Product support

Do you have any technical or commercial questions about the product before you buy?
Please contact us in advance.

DEDITEC Logo

Customer-
modifications

Our products often serve as the basis for customer-specific solutions.
Just get in touch with us.

DEDITEC Logo

We are
always there for you!

Since its foundation in 2008, Dipl. Ing. Jürgen Siebert has been the managing director of DEDITEC GmbH. He will also be happy to advise you personally.

DEDITEC LogoProduct- & Service-Hotline: +49 (0) 22 32 / 50 40 8 – 40 DEDITEC LogoQuestions about the product or order: support@deditec.de