Conveniently transmit and receive J1939 messages – configure them with the DEDITEC ICT-Tool!
Whether in commercial vehicles, agricultural machinery, construction machinery, or industrial systems, J1939 is an established CAN-based communication protocol used in many applications. With J1939 mode in the ICT-Tool, the appropriate message addressing for our CAN modules can be configured easily and clearly.
Clear configuration instead of manual calculation
The settings are entered in separate fields for message priority, message type, sender address, and, where applicable, recipient address. The ICT-Tool automatically calculates the required CAN ID from these values. When reading an existing configuration, the individual parameters are also displayed clearly again.
Transmit measured values and control outputs
J1939 mode is available for both transmitting and receiving CAN messages. Depending on the module configuration, digital input states or analog measured values can be transmitted, for example. Received data can in turn be used to switch digital outputs or set analog output values.
Configuration is carried out as usual using the ICT-Tool. This allows you to adapt the message addressing and the I/O data to be transmitted specifically to your application.
Install the installation program and check the module functions.

