Determine the average over several minutes – directly in the module!
With time-based A/D averaging, we are extending the capabilities of our NET-AD2 modules: You define the period over which measured values are to be acquired and combined into an average value. For example, you can measure over five minutes and then evaluate the average value for this period.
From A/D filtering to time-based evaluation
Our proven A/D filter calculates the average from a defined number of measurements. With filter level 10, for example, ten measurements are combined to smooth short-term fluctuations in the signal.
The new function is based on the measurement period: You define the required duration, and the module calculates the average from the measured values acquired during this time. This makes it possible to evaluate the signal over longer periods as well.
When is this useful?
When measured values fluctuate continuously, the average value over a defined period is often more relevant for evaluation. For example, this makes it possible to determine the average level of a sensor signal over the course of several minutes. This facilitates process monitoring, long-term measurements, and the comparison of different measurement periods.
Set the measurement duration to match the application
The required duration is configured via DELIB in seconds and can be set individually for multiple submodules. Both the configured time period and the elapsed measurement time can also be queried. If required, time-based averaging can be combined with the existing A/D filter.
Install the installation program and check the module functions.

