Highlights
- 36 channels
- 250 MHz to 100 Hz sampling rate
- 512 KSamples memory depth per channel
- 2 trigger levels
- 1/8 to 7/8 pre-trigger
- Windows software Logi+
USB Logic Analyzer USB-LOGI-250
The company DEDITEC GmbH from Brühl presents a new USB logic analyzer with a memory depth of 1/2 Mega Sample per channel.
32 channels are sampled at up to 250 MSamples/sec
The USB-LOGI-250 enables the acquisition of 36 digital channels with a memory depth of 512 KSamples per channel. These signals can be captured at a maximum sampling rate of 250 MHz (adjustable down to 100 Hz), stored temporarily in the logic analyzer, and then graphically visualized on a PC.
The device also supports a pre-trigger setting between 1/8 and 7/8, allowing recording to begin before the actual trigger event. Two trigger levels can be configured for each channel with the following conditions: high, low, rising edge, falling edge, or both edges. These two levels can be logically combined via a dedicated configuration menu.
All electronics are housed in a robust and compact enclosure measuring just 117 x 79 x 47 mm (L x W x H). Communication with the PC is handled via USB, and no additional power supply is required.
Free measurement software “Logi+”
The free, German-language Windows software “Logi+” allows all channels to be graphically displayed on the monitor. Various settings – such as the pre-trigger or trigger conditions – can be configured easily via the PC interface. This means that only a few minutes are needed from installation to the first measurement.
Microkleps test clips for tight spaces
Optional accessories include miniature test clips (“Microkleps”). These precision test hooks with rotating jaws are ideal for measurements on very fine wires or tightly packed components, such as SMD parts (e.g. ICs with 1.27 mm pitch).