Highlights
- 36 channels
- 500 MHz to 100 Hz sampling rate
- 4096 samples per channel
- 2 trigger levels
- 1/8 to 7/8 pre-trigger range
- Windows software: Logi+
USB-LOGI-500 Logic Analyzer
With the USB-LOGI-500, DEDITEC GmbH in Brühl enters the field of digital data acquisition.
Brühl, 29/05/2009
500 MHz Logic Analyzer
The USB-LOGI-500 features a maximum sampling frequency of 500 MHz (adjustable down to 100 Hz).
A total of 36 channels are sampled, each with a memory depth of 4096 samples.
The pre-trigger can be set from 1/8 to 7/8 of the total sample depth, enabling recording before the actual trigger event.
Two independent trigger levels are available.
Each channel can be configured with the following trigger conditions: (High, Low, Rising edge, Falling edge, Both edges) The two trigger levels can be combined using a dedicated configuration menu.
All electronics are housed in a compact and durable enclosure with dimensions of just 117 × 79 × 47 mm.
Communication with the PC is handled via USB—no external power supply is required.
Logi+ Software
Included with the device is the Logi+ Windows software, which provides a graphical representation of all channels on-screen.
Both pre-trigger and trigger settings are fully configurable.
Measurement results can be saved, reloaded, and exported for documentation purposes.
Optional Accessories
Optional accessories include: 20-pin measurement cables (for 18 measurement channels + GND) and Compact test clips (“Micro Kleps”)