Für ARM9 Boards mit FPGA:
/etc/init.d/S60_autostart_user.sh
#!/bin/sh
#http-Daemon start with html-Home Directory "/var/www"
httpd -h /var/www
#configure Ethernet Interface with ip-adress
ifconfig eth0 192.168.1.9
#start fpga-module to access memory-area of fpga
insmod /usr/bin/ecpu1000_fpga.ko
#start inetd to support telnet and ftp
inetd
|
Für ARM9 Boards ohne FPGA:
/etc/init.d/S60_autostart_user.sh
#!/bin/sh
#http-Daemon start with html-Home Directory "/var/www"
httpd -h /var/www
#configure Ethernet Interface with ip-adress
ifconfig eth0 192.168.1.9
#start inetd to support telnet and ftp
inetd
|
