{"id":25585469,"date":"2019-11-21T10:49:14","date_gmt":"2019-11-21T09:49:14","guid":{"rendered":"https:\/\/deditec.khpmax5.serverpress.de\/shop\/uncategorized\/ro-eth-usb-di-do-rel\/"},"modified":"2026-09-14T10:15:30","modified_gmt":"2026-09-14T08:15:30","slug":"tcp-di-do","status":"publish","type":"product","link":"https:\/\/www.deditec.de\/en\/shop\/ro\/usb-ethernet-http\/tcp-di-do\/","title":{"rendered":"TCP DI\/DO * Ethernet\/USB module with 8\/16\/32\/64 * inputs and 8\/16\/32\/64 * outputs (Modbus TCP-compatible)"},"content":{"rendered":"<section class=\"ddt-product-description product-description-RO-ETH-LC-USB-O8-64-R8-64\">\n<h2>Product Description<\/h2>\n<p>The RO-(ETH\/LC)\/(USB)-O8-64-R8-64 is an industrial TCP DI\/DO module series for decentralized acquisition and switching of digital signals. Depending on the version, the remote I\/O module combines 8, 16, 32 or 64 opto-isolated digital inputs with 8, 16, 32 or 64 digital relay outputs. The Ethernet variants integrate digital input and output signals into industrial networks via TCP\/IP, HTTP and Modbus TCP. The USB variants are intended for local PC, test bench and machine integration.<\/p>\n<h3>System Role in Decentralized I\/O and Automation Architectures<\/h3>\n<p>The TCP DI\/DO module acts as a decentralized I\/O unit between field signals and control, visualization or evaluation software. Digital input signals from sensors, switch contacts, machine states or limit switches are captured and made available for further processing. At the same time, external loads, signaling circuits or control circuits can be switched via digital relay outputs. This makes the module series suitable for distributed automation structures where digital signals are not connected directly to a central PLC card but integrated via Ethernet, Modbus TCP or USB.<\/p>\n<h3>Ethernet Variants with Modbus TCP for PLC, SCADA and Remote Access<\/h3>\n<p>The Ethernet variants enable integration into industrial networks via 10\/100 Mbit Ethernet, TCP\/IP, HTTP and Modbus TCP. The IP address can be assigned via DHCP or configured statically. Using Modbus TCP, digital inputs can be queried and digital relay outputs can be switched from control, SCADA or automation systems. For applications involving remote access, remote monitoring or decentralized system supervision, the Ethernet interface provides a clear system role: signals are captured or switched directly at the installation site and forwarded to higher-level systems via the network.<\/p>\n<h3>USB Variants for Local PC, Test Bench and Machine Integration<\/h3>\n<p>The USB variants are designed for applications where digital input and output signals are processed locally on a PC, industrial PC or control computer. The USB interface is implemented as a Type-B connector and supports USB 2.0 \/ USB 1.1 with up to 480 Mbit\/s. This is particularly relevant for test benches, test systems, laboratory setups, service stations or machine applications without a fixed network infrastructure. USB simplifies direct commissioning, diagnostics and software integration while maintaining the I\/O functionality of the module series for digital switching and acquisition tasks.<\/p>\n<h3>Opto-Isolated Digital Inputs for Reliable Signal Acquisition<\/h3>\n<p>The digital inputs are implemented as optocoupler inputs for AC\/DC signals. The standard signal voltage range is \u00b115 V to \u00b130 V AC\/DC; optionally, a range of \u00b15 V to \u00b115 V AC\/DC is available. Galvanic isolation between input and output circuits is up to 2.5 kV AC for 1 minute. This supports reliable acquisition of digital states even in electrically demanding environments. Input filters, 16-bit counters per channel, programmable filter functions and flip-flops for detecting state changes support stable processing of real-world switching signals.<\/p>\n<h3>Digital Relay Outputs for Industrial Switching Tasks<\/h3>\n<p>The digital outputs are implemented as relay outputs for switching external loads and control circuits. Depending on the variant, 8, 16, 32 or 64 digital relay outputs are available. The relays are normally-open (NO) contacts designed for typical industrial control and signaling tasks. The relay outputs support a maximum switching voltage of 36 V AC\/DC, a maximum switching current of 0.5 A AC\/DC, a maximum transport current of 1 A AC\/DC and galvanic isolation between contact and coil of 1.5 kV RMS for 1 minute. Status LEDs per I\/O channel simplify diagnostics, commissioning and troubleshooting directly on the module.<\/p>\n<h3>Controlled Signal Processing with Event Control, M2M and Fail-Safe Functions<\/h3>\n<p>For industrial applications, channel count alone is not sufficient \u2014 controlled signal processing is equally important. Optocoupler inputs, galvanically isolated relay outputs, status indicators, input filters, counter functions, timeout shutdown and fail-safe functions support reliable and traceable operation. Event control can link digital signal events directly within the module to defined reactions, enabling simple event-based automation tasks. M2M functions additionally allow direct linking of I\/O states and switching operations within suitable automation and monitoring structures.<\/p>\n<h3>Typical Application Areas<\/h3>\n<ul>\n<li>Machine and plant automation with decentralized digital signal acquisition<\/li>\n<li>PLC and SCADA-related I\/O expansion via Ethernet and Modbus TCP<\/li>\n<li>Test bench automation and test systems using local USB variants<\/li>\n<li>Remote monitoring, remote maintenance and decentralized system supervision<\/li>\n<li>Building automation, signaling systems and digital control circuits<\/li>\n<li>Control cabinet applications with opto-isolated inputs and relay outputs<\/li>\n<li>Laboratory, service and development environments with PC-based I\/O integration<\/li>\n<\/ul>\n<h3>Integration, Software and Operation<\/h3>\n<p>Integration is performed via Ethernet with TCP\/IP, HTTP and Modbus TCP or via USB for local connectivity, depending on the variant. For software projects, the DEDITEC driver library DELIB, API interfaces, command-line access and documentation are available. This allows the module to be integrated into existing PLC and SCADA structures as well as into custom Windows or Linux applications. Configuration, diagnostics and commissioning are supported through the DEDITEC software environment.<\/p>\n<h3>Made in Germany and Technical Documentation<\/h3>\n<p>DEDITEC develops and supplies industrial I\/O, control and measurement modules for professional automation applications. The RO-(ETH\/LC)\/(USB)-O8-64-R8-64 stands for Made in Germany, documented interfaces, transparent technical data and a module platform designed for long-term industrial use. For users, this provides a reliable product foundation for decentralized I\/O applications in mechanical engineering, automation, test bench technology, building automation and industrial remote monitoring.<\/p>\n<\/section>\n","protected":false},"excerpt":{"rendered":"<section class=\"ddt-technical-data product-technical-data-RO-ETH-LC-USB-O8-64-R8-64\">\n<h2>Technical Data<\/h2>\n<p>The RO-(ETH\/LC)\/(USB)-O8-64-R8-64 is an industrial TCP DI\/DO module for acquiring digital input signals and switching digital relay outputs via Ethernet, Modbus TCP or USB. Depending on the variant, 8, 16, 32 or 64 opto-isolated digital inputs and 8, 16, 32 or 64 digital relay outputs are available. This makes the remote I\/O module suitable for mechanical engineering, control cabinet construction, test benches, PLC\/SCADA integration and decentralized automation tasks.<\/p>\n<p>&nbsp;<\/p>\n<h3>At a Glance<\/h3>\n<ul>\n<li>Remote I\/O module for digital input and output signals<\/li>\n<li>Variants with 8, 16, 32 or 64 digital inputs and relay outputs<\/li>\n<li>Ethernet variants with 10\/100 Mbit Ethernet and Modbus TCP<\/li>\n<li>USB variants with USB 2.0 \/ USB 1.1 up to 480 Mbit\/s<\/li>\n<li>Digital inputs via galvanically isolated optocouplers<\/li>\n<li>Digital relay outputs with normally-open (NO) function<\/li>\n<li>Supply voltage: +12 V to +24 V DC<\/li>\n<li>16-bit counter per input channel<\/li>\n<li>Adjustable input filter from 1 to 255 ms<\/li>\n<li>Status LEDs for I\/O channels, interface activity, errors and timeout<\/li>\n<li>DIN rail mounting 35 x 7.5 mm<\/li>\n<\/ul>\n<h3>Interface and Communication<\/h3>\n<ul>\n<li>Ethernet variants with 10\/100 Mbit Ethernet<\/li>\n<li>Modbus TCP for integration into PLC, SCADA and automation systems<\/li>\n<li>IP configuration via DHCP or static IP address<\/li>\n<li>LAN configuration via the DEDITEC ICT tool<\/li>\n<li>Galvanically isolated Ethernet interface up to 1.5 kV AC for 1 minute<\/li>\n<li>Average access time of 1 ms from PC to module<\/li>\n<li>USB variants with Type-B connector<\/li>\n<li>USB 2.0 \/ USB 1.1 interface with up to 480 Mbit\/s<\/li>\n<\/ul>\n<h3>Digital Inputs<\/h3>\n<ul>\n<li>Optocoupler inputs for AC\/DC signals<\/li>\n<li>Signal voltage range: \u00b115 V to \u00b130 V AC\/DC<\/li>\n<li>Optional signal voltage range: \u00b15 V to \u00b115 V AC\/DC<\/li>\n<li>Galvanic isolation between input and output circuits up to 2.5 kV AC for 1 minute<\/li>\n<li>Maximum input current: 14 mA<\/li>\n<li>Adjustable input filter: 0 to 255 ms<\/li>\n<li>16-bit counter per input channel with up to 65,535 counts<\/li>\n<li>Internal counting logic up to 10 kHz<\/li>\n<li>Flip-flop function for detecting state changes between two readout cycles<\/li>\n<\/ul>\n<h3>Digital Outputs<\/h3>\n<ul>\n<li>Digital relay outputs for industrial switching tasks<\/li>\n<li>Relay outputs as normally-open (NO) contacts<\/li>\n<li>Relay type: SIL05-1A72D<\/li>\n<li>Max. switching voltage: 36 V AC\/DC<\/li>\n<li>Max. switching current: 0.5 A AC\/DC<\/li>\n<li>Max. transport current: 1 A AC\/DC<\/li>\n<li>Max. switching power: 10 W<\/li>\n<li>Galvanic isolation between contact and coil: 1.5 kV RMS \/ 1 minute<\/li>\n<\/ul>\n<h3>Additional Functions<\/h3>\n<ul>\n<li>Status indication via LEDs for supply voltage, interface activity, errors, timeout shutdown and I\/O access<\/li>\n<li>One LED per I\/O channel for fast diagnostics in control cabinets or test benches<\/li>\n<li>Input filter for stable processing of real switching and sensor signals<\/li>\n<li>Counter and flip-flop functions for pulses and state changes<\/li>\n<li>Timeout shutdown for defined reactions in case of communication or control issues<\/li>\n<li>Pluggable WAGO spring-clamp terminals with locking mechanism, misplug protection and single-wire connection for conductor types up to 1.5 mm\u00b2<\/li>\n<\/ul>\n<h3>Mechanics and Environmental Conditions<\/h3>\n<ul>\n<li>Supply voltage: +12 V to +24 V DC<\/li>\n<li>DIN rail mounting 35 x 7.5 mm<\/li>\n<li>Operating temperature: +10 \u00b0C to +50 \u00b0C<\/li>\n<li>Dimensions for 16 total I\/Os: 122 x 85 x 51.5 mm (H x W x D)<\/li>\n<li>Dimensions for 32 total I\/Os: 122 x 126 x 51.5 mm (H x W x D)<\/li>\n<li>Dimensions for 64 total I\/Os: 122 x 208 x 51.5 mm (H x W x D)<\/li>\n<li>Dimensions for 128 total I\/Os: 122 x 372 x 51.5 mm (H x W x D)<\/li>\n<\/ul>\n<\/section>\n","protected":false},"featured_media":25586080,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false,"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[143,142],"product_tag":[],"class_list":{"0":"post-25585469","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"einausgang-di8","7":"einausgang-digitale-eingaenge","8":"einausgang-digitale-ausgaenge","9":"einausgang-di16","10":"einausgang-di32","11":"einausgang-do8","12":"einausgang-do16","13":"einausgang-di64","14":"einausgang-do32","15":"einausgang-do64","16":"einausgang-_digital","17":"schnittstelle-ethernet","18":"schnittstelle-usb","19":"product_cat-usb-ethernet-http","20":"product_cat-ro","21":"pa_anzahl-kanaele-di-do-8_di_do_ch_de","22":"pa_anzahl-kanaele-di-do-16_di_do_ch_de","23":"pa_anzahl-kanaele-di-do-32_di_do_ch_de","24":"pa_anzahl-kanaele-di-do-64_di_do_ch_de","25":"pa_schnittstellen-ethernet-schnittstelle_de","26":"pa_schnittstellen-usb-schnittstelle_de","28":"first","29":"instock","30":"taxable","31":"shipping-taxable","32":"purchasable","33":"product-type-variable"},"acf":{"produktvergleich_rest_api":"","zusatztext_rest_api":"","produktbeschreibung_rest_api":"","technische_daten_rest_api":"","produktvergleich":"<h2>Comparison: TCP DI\/DO Module as Remote I\/O Module with Modbus TCP, Ethernet and USB<\/h2>\n<p>The following comparison classifies the RO-(ETH\/LC)\/(USB)-O8-64-R8-64 technically: as an industrial TCP DI\/DO module for decentralized acquisition of digital input signals and switching of digital relay outputs. The table is designed for quick evaluation for purchasing, development, control cabinet construction, test bench construction and industrial automation.<\/p>\n<p>&nbsp;<\/p>\n<div class=\"g6g-respo-table\">\n<table>\n<tbody>\n<tr class=\"table-headline-row\">\n<td colspan=\"4\">\n<h3>Product Type, Interfaces and System Integration<\/h3>\n<\/td>\n<\/tr>\n<tr class=\"table-repeat-head\">\n<th>Feature<\/th>\n<th>Market Comparison<\/th>\n<th>RO-(ETH\/LC)\/(USB)-O8-64-R8-64<\/th>\n<th>Practical Benefit<\/th>\n<\/tr>\n<tr>\n<td><strong>Product Type<\/strong><\/td>\n<td>Many digital I\/O modules are designed for a single interface or a fixed channel size.<\/td>\n<td>Industrial TCP DI\/DO module as a remote I\/O module with Ethernet or USB variant.<\/td>\n<td>Digital signals can be acquired and switched either decentrally in the network or locally on a PC depending on the application.<\/td>\n<\/tr>\n<tr>\n<td><strong>Interface Concept<\/strong><\/td>\n<td>Typical remote I\/O modules often offer either Ethernet or USB, but not both integration paths within one module series.<\/td>\n<td>Ethernet variants for TCP\/IP, HTTP and Modbus TCP, and USB variants for local PC integration.<\/td>\n<td>Simplifies choosing between network operation, remote access, PLC\/SCADA integration and local test bench or service applications.<\/td>\n<\/tr>\n<tr>\n<td><strong>Modbus TCP<\/strong><\/td>\n<td>Modbus TCP is not always available on Ethernet I\/O modules or only in specific device variants.<\/td>\n<td>Ethernet variants with Modbus TCP for integrating digital inputs and outputs into automation networks.<\/td>\n<td>Digital signals can be used in PLC, SCADA and monitoring systems via a widely used industrial protocol.<\/td>\n<\/tr>\n<tr>\n<td><strong>Remote and Local Connectivity<\/strong><\/td>\n<td>Some modules are optimized either for stationary network integration or for local PC applications.<\/td>\n<td>Ethernet for decentralized remote I\/O tasks; USB for local PC, service, laboratory and test bench integration.<\/td>\n<td>One product concept covers different application scenarios without changing the signal and switching logic.<\/td>\n<\/tr>\n<tr class=\"table-headline-row\">\n<td colspan=\"4\">\n<h3>Digital Inputs, Relay Outputs and Signal Processing<\/h3>\n<\/td>\n<\/tr>\n<tr class=\"table-repeat-head\">\n<th>Feature<\/th>\n<th>Market Comparison<\/th>\n<th>RO-(ETH\/LC)\/(USB)-O8-64-R8-64<\/th>\n<th>Practical Benefit<\/th>\n<\/tr>\n<tr>\n<td><strong>Channel Variants<\/strong><\/td>\n<td>Many digital I\/O modules are available in fixed channel sizes or require multiple devices for higher channel counts.<\/td>\n<td>Variants with 8, 16, 32 or 64 digital inputs and 8, 16, 32 or 64 digital relay outputs.<\/td>\n<td>The channel count can be selected to match the machine, system, test station or control cabinet structure.<\/td>\n<\/tr>\n<tr>\n<td><strong>Digital Inputs<\/strong><\/td>\n<td>On simple I\/O modules, digital inputs are not always opto-isolated or only support fixed signal levels.<\/td>\n<td>Optocoupler inputs for AC\/DC signals with \u00b115 V to \u00b130 V AC\/DC, optional \u00b15 V to \u00b115 V AC\/DC.<\/td>\n<td>Switch contacts, sensors, limit switches and machine states can be captured electrically isolated and robustly.<\/td>\n<\/tr>\n<tr>\n<td><strong>Digital Outputs<\/strong><\/td>\n<td>Digital outputs are implemented as transistor, MOSFET or relay outputs depending on the module.<\/td>\n<td>Digital relay outputs as normally-open (NO), max. 36 V AC\/DC, max. 0.5 A switching current, max. 1 A transport current.<\/td>\n<td>Suitable for industrial control, signaling and release signals requiring potential-free relay contacts.<\/td>\n<\/tr>\n<tr>\n<td><strong>Input Filter and Counters<\/strong><\/td>\n<td>Signal filtering and counting functions often need to be implemented externally in the controller or software.<\/td>\n<td>Adjustable input filter from 1 to 255 ms, 16-bit counter per channel and internal counting logic up to 10 kHz.<\/td>\n<td>Bouncing or noisy input signals can be captured more reliably; pulses can be counted directly at the input channel.<\/td>\n<\/tr>\n<tr>\n<td><strong>State Changes<\/strong><\/td>\n<td>Short signal changes can be missed during purely cyclic polling if no latch function is available.<\/td>\n<td>Flip-flop functions for detecting transitions from low to high and high to low between readout cycles.<\/td>\n<td>State changes can be evaluated more reliably even if they do not occur exactly at the polling moment.<\/td>\n<\/tr>\n<tr class=\"table-headline-row\">\n<td colspan=\"4\">\n<h3>Automation, Operational Safety and Diagnostics<\/h3>\n<\/td>\n<\/tr>\n<tr class=\"table-repeat-head\">\n<th>Feature<\/th>\n<th>Market Comparison<\/th>\n<th>RO-(ETH\/LC)\/(USB)-O8-64-R8-64<\/th>\n<th>Practical Benefit<\/th>\n<\/tr>\n<tr>\n<td><strong>Galvanic Isolation<\/strong><\/td>\n<td>Galvanic isolation is not always implemented equally for inputs, communication and relay sections.<\/td>\n<td>Optocoupler inputs up to 2.5 kV AC for 1 minute; Ethernet isolated up to 1.5 kV AC for 1 minute; relay contact to coil 1.5 kV RMS for 1 minute.<\/td>\n<td>Helps with potential differences, interference and industrial signal environments, increasing operational safety.<\/td>\n<\/tr>\n<tr>\n<td><strong>Event Control<\/strong><\/td>\n<td>Simple I\/O modules often only provide inputs and outputs for external polling or control.<\/td>\n<td>Event control for event-based reactions to digital signal states.<\/td>\n<td>Simple automation reactions can be implemented closer to the I\/O module, reducing load on the main controller.<\/td>\n<\/tr>\n<tr>\n<td><strong>M2M Functions<\/strong><\/td>\n<td>On many I\/O modules, device linking must be handled entirely by PC, PLC or control system.<\/td>\n<td>M2M functions for direct linking of I\/O states and switching operations in suitable automation structures.<\/td>\n<td>Supports decentralized automation logic and can reduce communication overhead in distributed applications.<\/td>\n<\/tr>\n<tr>\n<td><strong>Timeout and Fail-Safe<\/strong><\/td>\n<td>Defined output states during communication issues are not always provided on remote I\/O modules.<\/td>\n<td>Timeout shutdown and fail-safe functions for defined reactions during communication or control problems.<\/td>\n<td>Outputs can react more predictably during faults, important for machines, test benches and remote access.<\/td>\n<\/tr>\n<tr>\n<td><strong>Status and Channel Diagnostics<\/strong><\/td>\n<td>Status indicators on compact I\/O modules are sometimes limited to a few LEDs.<\/td>\n<td>Status indicators for supply voltage, interface activity, errors, timeout, I\/O access and one LED per I\/O channel.<\/td>\n<td>Simplifies commissioning, control cabinet diagnostics, troubleshooting and service directly on the module.<\/td>\n<\/tr>\n<tr class=\"table-headline-row\">\n<td colspan=\"4\">\n<h3>Mounting, Wiring and Industrial Use<\/h3>\n<\/td>\n<\/tr>\n<tr class=\"table-repeat-head\">\n<th>Feature<\/th>\n<th>Market Comparison<\/th>\n<th>RO-(ETH\/LC)\/(USB)-O8-64-R8-64<\/th>\n<th>Practical Benefit<\/th>\n<\/tr>\n<tr>\n<td><strong>Power Supply<\/strong><\/td>\n<td>Many industrial I\/O modules are designed for typical 24 V DC environments; flexible supply ranges vary by manufacturer.<\/td>\n<td>Supply voltage +12 V to +24 V DC.<\/td>\n<td>Usable in typical 12 V and 24 V DC environments such as test benches, control cabinets and machines.<\/td>\n<\/tr>\n<tr>\n<td><strong>Control Cabinet Mounting<\/strong><\/td>\n<td>Depending on module design, additional brackets, table housings or special mounts may be required.<\/td>\n<td>DIN rail mounting 35 x 7.5 mm.<\/td>\n<td>Supports direct use in control cabinets, test benches and modular automation setups.<\/td>\n<\/tr>\n<tr>\n<td><strong>Connectors<\/strong><\/td>\n<td>Wiring, maintenance and replacement depend heavily on terminal type, locking and misplug protection.<\/td>\n<td>Pluggable WAGO spring-clamp terminals with locking mechanism, 100% misplug protection and single-wire connection up to 1.5 mm\u00b2.<\/td>\n<td>Simplifies wiring, service and replacement in control cabinets and reduces misplug risks.<\/td>\n<\/tr>\n<tr>\n<td><strong>Operating Temperature<\/strong><\/td>\n<td>Temperature ranges must be checked separately for control cabinet, laboratory or test bench use.<\/td>\n<td>Operating temperature +10 \u00b0C to +50 \u00b0C.<\/td>\n<td>Suitable for typical industrial indoor, control cabinet, laboratory and test bench environments.<\/td>\n<\/tr>\n<tr>\n<td><strong>Form Factors<\/strong><\/td>\n<td>As channel count increases, size, wiring effort and cabinet space requirements change.<\/td>\n<td>Dimensions depending on total I\/O count: 16, 32, 64 or 128 total I\/Os.<\/td>\n<td>Size can be planned according to required channel count and available cabinet space.<\/td>\n<\/tr>\n<tr class=\"table-headline-row\">\n<td colspan=\"4\">\n<h3>Software, Configuration and Commissioning<\/h3>\n<\/td>\n<\/tr>\n<tr class=\"table-repeat-head\">\n<th>Feature<\/th>\n<th>Market Comparison<\/th>\n<th>RO-(ETH\/LC)\/(USB)-O8-64-R8-64<\/th>\n<th>Practical Benefit<\/th>\n<\/tr>\n<tr>\n<td><strong>LAN Configuration<\/strong><\/td>\n<td>Ethernet I\/O modules are configured via web interface, DIP switches, software tools or protocol commands depending on manufacturer.<\/td>\n<td>LAN configuration via the DEDITEC ICT tool; IP address via DHCP or static.<\/td>\n<td>Simplifies network commissioning and enables clean preparation for PLC, SCADA and remote I\/O applications.<\/td>\n<\/tr>\n<tr>\n<td><strong>Access Time<\/strong><\/td>\n<td>Usable access speed depends on interface, driver, network and software integration.<\/td>\n<td>Average access time of 1 ms from PC to module.<\/td>\n<td>Helps with technical evaluation for test benches, control software and time-critical I\/O queries.<\/td>\n<\/tr>\n<tr>\n<td><strong>Software Integration<\/strong><\/td>\n<td>Integration is limited to certain interfaces, platforms or libraries depending on manufacturer.<\/td>\n<td>Integration via DEDITEC software environment, DELIB driver library, API interfaces and documentation.<\/td>\n<td>Simplifies integration into custom PC, test bench, measurement and automation software.<\/td>\n<\/tr>\n<tr>\n<td><strong>Diagnostics and Service<\/strong><\/td>\n<td>On simple I\/O modules, diagnostic and test options during commissioning and maintenance are often limited.<\/td>\n<td>ICT tool, status LEDs, I\/O channel LEDs and documented interfaces for configuration and diagnostics.<\/td>\n<td>Supports commissioning, troubleshooting and later maintenance without requiring fully custom diagnostic software.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n","zusatztext":"<section class=\"ddt-use-cases product-use-cases-RO-ETH-LC-USB-O8-64-R8-64\">\n<h2>Typical Application Areas of the TCP DI\/DO Module<\/h2>\n<p>The RO-(ETH\/LC)\/(USB)-O8-64-R8-64 is suitable for industrial applications where digital signals need to be acquired decentrally and external loads switched via relay outputs. With Ethernet and Modbus TCP, USB connectivity, opto-isolated digital inputs and digital relay outputs, the remote I\/O module is particularly suitable for machines, control cabinets, test benches, PLC\/SCADA environments and distributed automation systems.<\/p>\n<p>&nbsp;<\/p>\n<h3>Suitable for<\/h3>\n<ul>\n<li>Machine and plant engineering<\/li>\n<li>Control cabinet construction and industrial control technology<\/li>\n<li>Test benches, test systems and laboratory automation<\/li>\n<li>Decentralized remote I\/O structures via Ethernet and Modbus TCP<\/li>\n<li>PLC, SCADA and process automation<\/li>\n<li>Service, commissioning and diagnostic applications via USB<\/li>\n<li>Building automation and technical infrastructure control<\/li>\n<li>Special-purpose machinery and custom automation solutions<\/li>\n<\/ul>\n<h3>Typical Applications<\/h3>\n<ul>\n<li>Acquisition of switching states, limit switches, end positions and sensor signals<\/li>\n<li>Switching signal lights, relays, signaling circuits, releases and external loads<\/li>\n<li>Integration of digital input and output signals into Ethernet and Modbus TCP networks<\/li>\n<li>Decentralized signal processing in distributed automation and monitoring systems<\/li>\n<li>Expanding existing PLC or SCADA architectures with digital I\/O channels<\/li>\n<li>Local PC connectivity for test benches, workstations, service stations and development systems<\/li>\n<li>Remote monitoring and remote control of digital states and switching functions<\/li>\n<li>Status monitoring and switching control in machines, systems and test environments<\/li>\n<\/ul>\n<h3>Typical Signal and Switching Tasks<\/h3>\n<ul>\n<li>Querying digital input signals via galvanically isolated optocoupler inputs<\/li>\n<li>Switching digital relay outputs for industrial control and signaling tasks<\/li>\n<li>Capturing state changes via input filters, counters and flip-flop functions<\/li>\n<li>Implementing simple event-based sequences with event control<\/li>\n<li>Direct linking of I\/O states and switching operations via M2M functions<\/li>\n<li>Defined reactions to communication or control issues via timeout and fail-safe functions<\/li>\n<li>Local diagnostics via status LEDs per I\/O channel<\/li>\n<li>Integration of digital field signals into PC-, network-, PLC- or SCADA-based control environments<\/li>\n<\/ul>\n<\/section>\n","sge_text":"<p>The RO-(ETH\/LC)\/(USB)-O8-64-R8-64 acquires and switches digital signals in industrial automation environments. Depending on the model, this module series combines 8, 16, 32, or 64 optically isolated digital inputs with 8, 16, 32, or 64 digital relay outputs. Ethernet versions are integrated into networks, PLCs, and SCADA systems via TCP\/IP, HTTP, and Modbus TCP; USB versions are suitable for local connections to PCs, test benches, and machines.<\/p>\n","question_1":"","answer_1":"","question_2":"","answer_2":"","question_3":"","answer_3":"","question_4":"","answer_4":"","question_5":"","answer_5":"","question_6":"","answer_6":"","question_7":"","answer_7":"","question_8":"","answer_8":"","question_9":"","answer_9":"","question_10":"","answer_10":"","faq_rest_api":"<div class=\"et_pb_row\">\n<div class=\"et_pb_column et_pb_column_4_4  et_pb_css_mix_blend_mode_passthrough et-last-child\">\n<div class=\"et_pb_module et_pb_toggle ally-toggle et_pb_toggle_item  et_pb_toggle_close\">\n<h5 class=\"et_pb_toggle_title\">WHAT OPTIONS ARE AVAILABLE FOR PROGRAMMATIC INTEGRATION OF THE MODULE?<\/h5>\n<div class=\"et_pb_toggle_content clearfix\">\n<p>For USB devices, integration is carried out via the DEDITEC DELIB driver library. Ethernet devices also support this library and additionally provide access via TCP\/IP, Modbus TCP, as well as an integrated web interface.<\/p>\n<\/div>\n<\/div>\n<div class=\"et_pb_module et_pb_toggle ally-toggle et_pb_toggle_item  et_pb_toggle_close\">\n<h5 class=\"et_pb_toggle_title\">WHICH SOFTWARE AND PROGRAMMING LANGUAGES ARE SUPPORTED?<\/h5>\n<div class=\"et_pb_toggle_content clearfix\">\n<p>The DELIB API supports numerous programming languages such as Python, C, C++, C#, VB, VB.NET, and Java. In addition, sample programs and a command-line interface solution for Windows and Linux are available. This allows the TCP DI\/DO modules to be quickly integrated into existing software projects.<\/p>\n<\/div>\n<\/div>\n<div class=\"et_pb_module et_pb_toggle ally-toggle et_pb_toggle_item  et_pb_toggle_close\">\n<h5 class=\"et_pb_toggle_title\">WHERE CAN I FIND INFORMATION ABOUT THE AVAILABLE INTERFACES AND FUNCTIONS?<\/h5>\n<div class=\"et_pb_toggle_content clearfix\">\n<p>A complete description of the supported interfaces, communication options, and device functions can be found in the module manual. It is available at any time via the \"Downloads and Manuals\" tab on the respective product page as well as in the download section of the DEDITEC homepage.<\/p>\n<\/div>\n<\/div>\n<div class=\"et_pb_module et_pb_toggle ally-toggle et_pb_toggle_item  et_pb_toggle_close\">\n<h5 class=\"et_pb_toggle_title\">WHERE CAN I FIND AN OVERVIEW OF ALL AVAILABLE API COMMANDS?<\/h5>\n<div class=\"et_pb_toggle_content clearfix\">\n<p>A complete overview of all supported API commands can be found in the manual of the respective module. In addition, the API documentation is available on the DEDITEC website in the \"Software\" section under \"Control and Programming\".<\/p>\n<\/div>\n<\/div>\n<div class=\"et_pb_module et_pb_toggle ally-toggle et_pb_toggle_item  et_pb_toggle_close\">\n<h5 class=\"et_pb_toggle_title\">IS THE RO-(ETH\/LC)\/(USB)-O8-64-R8-64 A COST-EFFECTIVE REMOTE I\/O SOLUTION FOR SMALLER PROJECTS?<\/h5>\n<div class=\"et_pb_toggle_content clearfix\">\n<p>Yes, the TCP DI\/DO module is particularly suitable for small to medium-sized automation projects. CAN bus connectivity, scalability (16, 32, or 64 I\/O), and reduced wiring effort enable a cost-efficient implementation.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<div class=\"et_pb_column et_pb_column_4_4 et_pb_css_mix_blend_mode_passthrough et-last-child\">\n"},"_links":{"self":[{"href":"https:\/\/www.deditec.de\/en\/wp-json\/wp\/v2\/product\/25585469","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.deditec.de\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.deditec.de\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.deditec.de\/en\/wp-json\/wp\/v2\/comments?post=25585469"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.deditec.de\/en\/wp-json\/wp\/v2\/media\/25586080"}],"wp:attachment":[{"href":"https:\/\/www.deditec.de\/en\/wp-json\/wp\/v2\/media?parent=25585469"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.deditec.de\/en\/wp-json\/wp\/v2\/product_brand?post=25585469"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.deditec.de\/en\/wp-json\/wp\/v2\/product_cat?post=25585469"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.deditec.de\/en\/wp-json\/wp\/v2\/product_tag?post=25585469"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}