Fan monitoring to check the motor speed

Name: Fan monitoring to check the motor speed
SKU: ZBH-FAN-CONTROL-2CH
Price: 417.50 EUR
Availability: InStock

Rated 0 out of 5

0 customer reviews

€ 496,83

incl. VAT plus Shipping Costs

Availability: In Stock SKU: ZBH-FAN-CONTROL-2CH Category: Monitoring modules

Max. Lüfterdrehzahl

Clear

This product is suitable for speed monitoring of two PWM fans. If the speed falls below a defined minimum speed, e.g. due to dirt or fan failure, corresponding signal and LED outputs are switched, which can be evaluated externally. The maximum speed of both fans can be set by means of a potentiometer. A specific software adaptation, e.g. the level of the minimum speed, can be offered optionally by us.

Monitoring of 2 fans (14V DC to 30V DC)
Maximum fan speed adjustable
Connection possibility for two external status LEDs
2* digital output for fan status
4* pluggable screw terminals for connection wiring
Top hat rail mounting

Technical data
Power supply	14V DC to 30V DC (with reverse polarity protection)
Inputs	2 * Speedometer signal PWM (CLK)
Outputs	• 2 x fan output (Vout, GND) • 2 x speed voltage 1V to 8V (Speed)- 2 x LED output for fan status: max. 5mA ( LED+/- ) • LED flashes = fan speed ok • LED lights up permanently = fan speed too low – 2 x signal output for fan status: 14V-30V DC / max. 10mA (FAN_OK) • Signal output High = Fan OK • Signal output Low = Fan not OK
Potentiometer	For setting the maximum fan speed. (1 potentiometer for both fans)
Connectors	4 x 4 pole pluggable screw terminals
Operating temperature	+10°C to +50°C
Dimensions	100 mm x 23 mm x 92mm (H x W x D)

Additional information

Weight	N/A
Max. Lüfterdrehzahl	ZBH-FAN-CONT_4500RPM, ZBH-FAN-CONT_6000RPM

DIN Rail

Top-hat rail for mounting our control technology modules.

Top-hat rail according to DIN EN 50022
Type: Phoenix Contact / 1208131
Dimensions in mm: 450 x 35 x 7.5 (L x W x D)

Power supply 24V/2A for DIN rail mounting

The DR-4524 from Mean Well is a 48W rail mount power supply for industrial applications. It offers protection against short circuit, overload, overvoltage and overheating.

Input voltage range: 85V… 264V AC / 120V DC … 370V DC
Output voltage: 24V DC
Output current: 2A
Nominal power: 48W

Reviews

There are no reviews yet.

Be the first to review “Fan monitoring to check the motor speed”

Use our advantages

Lifetime
updates

Free soft- & hardware(firmware)-updates.
Enjoy our lifetime update service.

5 years
Delivery availability

We offer at least 5 years delivery availability for our products.
Our experience shows that it is even about 10 years.

Questions about the product? Product support

Do you have any technical or commercial questions about the product before you buy?
Please contact us in advance.

Customer-
modifications

Our products often serve as the basis for customer-specific solutions.
Just get in touch with us.

We are
always there for you!

Since its foundation in 2008, Dipl. Ing. Jürgen Siebert has been the managing director of DEDITEC GmbH. He will also be happy to advise you personally.