With 16 opto-inputs, we start the series of our input-modules. Typical applications are status detection or counter functions. The galvanic isolated SER interface guarrantees a safe connection to the pc.

With 32 inputs, these modules can be used in larger installations.

The technical data are identical to the RO-SER-O32 module.

This module has 16 relays with a maximum switch current of 0,5A (max. 10W) each relay. A serial RS-232/RS-485 interface with galvanic isolation, guarrantees a safe connection to the pc.

This module has 32 relay outputs with a maximum switch current of 0,5A (max.10W) each relay. The technical data is identical to the RO-SER-R16 module.

The module has 64 relay outputs with a maximum switching current of 0,5A (max.10W) each relay. The technical data is identical to the RO-SER-R16 module.

This module is able to switch currents up to 2A by transistors. Electronic switches are more resistant against interfering impulses, but they can only switch DC voltages.

This module with 32 outputs is able to switch currents up to 2A by transistors. Electronic switches are more resistant against interfering impulses, but they can only switch DC voltages. The technical data are indentical to the RO-SER-M16 module.

The technical data are indentical to the RO-SER-M16 module.

This module has 16 galvanically isolated inputs and 16 galvanically isolated ralay outputs. The galvanic isolated SER interface guarrantees a safe connection to the pc.

The technical data are indentical to the RO-SER-O16-R16 module.

The technical data are indentical to the RO-SER-O16-R16 module.

With 16 galvanic isolated inputs and 16 optical isolated outputs, this module is a good choice when inputs and outputs are needed. The galvanic isolated SER interface guarrantees a safe connection to the pc.

The technical data are indentical to the RO-SER-O16-M16 module.

The technical data are indentical to the RO-SER-O16-M16 module.

This module with 16 A/D inputs and 4 D/A outputs has a resolution of 16 bits. By using the A/D converter voltages are converted into a digital value and by using the D/A converter digital values are transformed into a voltage.

Beginning with 16 A/D inputs, this product is our introduction to the analogue input modules. Using the A/D converter, the voltage is converted into a digital value and is read out by software through the RS-232/RS-485 interface. The range of the input voltage is modifiable through programming.

This module has 4 D/A outputs with a resotion of 16 bits and converts digital values into a voltage. The variety of software-adjustable voltage and current rages complements the flexibility of this module.

The module has 16 A/D input-channels (16 bit / 4 us conversion time) . The voltage (or optional the current) is converted into a digital value and is read out by software through the galvanically isolated serial interface. The range of the input voltage is modifiable through programming. The inputs have a common galvanic isolation.

This module has 2 A/D blocks with each 16 A/D inputs and has due to this twice as much inputs as the RO-SER-AD16_ISO.

This module has 2 D/A outputs with a resolution of 16 bits. The particularity is both channels towards each other are separately galanically isolated and are also galanically isolated to the module's power supply.

The technical data are the same as the RO-SER-DA2_ISO module.

The technical data are the same as the RO-SER-DA2_ISO module.

This module is able to control up to 2 two-phase stepper motors. The functionality is supported by an extensive driver library. That way simple tasks like driving to a certain position with acceleration and deceleration slope is very easy.