ARM 9 eval board with G-20 processor - ARM9 E-CPU-800
with 64 MB RAM, 128 MB Flash
E-BASE-800
19% VAT
ARM 9 eval board with G-20 processor - ARM9 E-CPU-800
with 64 MB RAM, 128 MB Flash
- E-CPU-800 module
- 7-24V power supply
- All interfaces available
- Board can be expand with own developments by two VG connectors
- Documents with all schematics of the E-BASE-800 board
- Software CD
- Power supply unit
This eval board is an optimal entry for developers. All interfaces are lead through by according connectors.
Quick start
For evaluating of our E-CPU-800 module we developed this E-BASE-800 board. It comes with all interfaces and connectors to run the E-CPU-800 module by Linux application.
Description
The starterkit contains all needed hard and softwarefuntions for a directly operation of the E-CPU-800 module. The CPU module is plugged on to the E-BASE-800 board by one or two 100pin Hirose FX8 connectors. All interfaces will be lead through by according jacks or headers and were provided without any hardware construction. Some signal states can be indicated by LED, what can be useful for better error analysis. There are also a VG96 and a VG48 connector on the board, that allows the user to expand or upgrade the E-BASE-800 board with own developments. With a power down function, the E-CPU-800 module can be driven in batterie mode. An additional DIP switch on the E-BASE-800 board was configured to generate some control signals manually.
|
The block diagram shows, which components are based on the module and which interfaces belong to the respective Hirose connectors.
Manuals
Manual E-BASE-1000 (Starterkit for E-CPU-1100 / E-CPU-1000 / E-CPU-800)
Manual E-BASE-1000 (Starterkit for E-CPU-1100 / E-CPU-1000 / E-CPU-800) Hardwaredescription Linux development boards
- Board overview
- Mechanics
- Schematics
- Switches
Manual E-BASE-800 (Starterkit for E-CPU-800)
Manual E-BASE-800 (Starterkit for E-CPU-800) Hardwaredescription Linux development boards
- Board overview
- Mechanics
- Schematics
- Switches
Manual Linux for Embedded
Manual Linux for Embedded Softwaredocumentation about our Linux-boards.
- Quickstart
- Installation of the toolchain
- Compiling the "first" C-program for a ARM9-board
- Installation of a NFS-server / TFTP-server
- Updating Linux Kernel and ROOT-filesystem
Datasheets
Pinout Hirose connector J1
Pinout Hirose connector J1 Technical pinout differences between the Hirose connector J1, the E-CPU-1100 and E-CPU-800 board (extracted from the schematics E-BASE-1000)
CAN Controller
CAN Controller Datasheet CAN-Controller
Downloads
Ubuntu 9.04 Desktop - Version 1.20 - Image für den VMware Player (ca.1,2 GB)
Ubuntu 9.04 Desktop - Version 1.20 - Image für den VMware Player (ca.1,2 GB) Installed components:
- Toolchain (ARM9 Crosscompiler)
- FTP-Server
- NFS-Server
- TFTP-Server
- simple source example in C with a script to compile
Project documents
Project documents Layout & Sheetfiles for Eagle